Question: I cannot click the Continue button because the contents of the window do not fit into the window itself, and the button is out of sight. What to do?
Answer: This rarely happens on crookedly configured operating systems. There is a TAB key on your keyboard. Click it to the desired menu item.

Question: The installation was not completed due to an unknown error. What to do?
Answer: Check out the explanation of error codes . I also recommend studying the installation log. It is located at C:\Program Files (x86)\Common Files\Adobe\Installers\Install.log. Perhaps here you will get more detailed information about the problem and how to fix it.

Question: I have a problem at the initial stage of installation, not described above. Can you give me some advice?
Answer: Try replacing the Set-up.exe file used in the distribution with the one downloaded from here .

Question: What needs to be done to make it possible to work with cloud storage, libraries and other online services?
Answer: To do this, you need to connect to the Adobe server with your ID by selecting “Help->Sign In” from the program menu and going through authorization. I strongly recommend closing the window in which you will be asked to run the trial version with a cross. In this case, in the future, you will not encounter the problem of the appearance of an annoying message about the end of the trial period! After restarting the program, online services will become available.

Question: What's wrong with disabling spy modules?
Answer: The spyware modules Log Transport Application (LogTransport2.exe) and CRLog Transport Application (CRLogTransport.exe) are disabled. The files that initialize them have been renamed to LogTransport2.exe.bak and CRLogTransport.exe.bak, respectively. If you suddenly want to restore their functionality, simply remove the .bak extension from them. Anticipating the question of some users why AdobeIPCBroker.exe is not blocked, I want to say that without it some online services will not work.

Question: What about medicines in the current version of the build?
Answer: Craftsmen have produced medicines for this line of programs. I built the disinfected files into the program distributions, so you don’t need to do anything to cure them. Treatment solutions from uncia and WhiteDeath are involved. Just in case, the original files are saved with the .bak extension. To restore them, remove the .bak extension from these files and replace the existing patched files with them.

Question: When opening the program, the error “Adobe Creative Cloud, needed to resolve the problem, is missing or damaged...” appears. What to do?
Answer: You have “tails” left in your system from previous installations of Adobe Creative Cloud components. They need to be removed. To do this, use the Adobe Creative Cloud Cleaner Tool . For the component to remove, select first All, and then Adobe Creative Cloud Desktop. After this, reinstall the failed program. Such cleaning and reinstallation will not harm previously installed programs.

Question: After installing Photoshop 2024, the error "SSE 4.2 or later" appears. What to do?
Answer: According to Adobe , Photoshop 2021 and later requires a processor that supports SSE 4.2 or later. Unfortunately, if your processor does not support this architecture, then this version of Photoshop will not work on your computer.

Question: I can’t download neurofilters in Photoshop 2024. Why?
Answer: If you are denied downloading neurofilters, then delete the folder C:\Users\<username>\AppData\Roaming\Adobe\UXP\PluginsStorage\PHSP\25\Internal\com.adobe.nfp.gallery\PluginData. Do you see the number 25 along the way? If, in addition to folder 25, you also have 24, 23, etc., then you need to clean them out too! After this, restart the program - the filters should start downloading. I recommend downloading all the necessary filters right away, because when you delete this folder, you also delete all previously downloaded neurofilters.

Question: Generative AI does not work for me in Photoshop 2024 and Illustrator 2024. Is there any way to solve this issue?
Answer: Only people who have actually paid for a subscription can use generative tools. And even then, they have restrictions on the number of generations. Also, generative tools can be used during a free trial period of 14 days. That is, if you really need generative tools, then register a new business account here (14 days trial versus 7 for a personal one, plus, you don’t need to link a credit card to your account (not for all countries)) and activate the trial period, then log in with it using the program through the menu "Help->Login" (Help->Sign In). After 14 days, register a new ID. And so on until you get tired of it. Oh, and don't forget to delete the outbound rule in Windows Defender Firewall named "Adobe Unlicensed Pop-up"! Unfortunately, there are no other ways at the moment. For residents of the Russian Federation, the procedure is somewhat more complicated. Since Adobe has officially left Russia, you will need to use a VPN during registration and while using generative tools. Moreover, not only in the browser! You need a VPN that intercepts Internet connections and other programs on the computer, in particular Adobe applications. Yes, and before registering a new account, do not forget to log out of the old one, both in programs and in the browser. In your browser, it is also advisable to clear cookies for the Adobe website.

Question: When I launch Animate 2024, instead of the Start screen, I just have a black background. What to do?
Answer: If the presence of the start screen is not particularly important to you, then simply use the program menu to create/open a file. If you want to see the initial screen at startup, you need to connect to the Adobe server with your ID by selecting “Help->Sign In” from the program menu and going through authorization - the initial screen will work normally.

Question: Acrobat Pro requires my authorization when starting. This is fine?
Answer: Acrobat Pro installed uncured. Most likely, this happened because you installed an updated version of the program over an old, previously installed one. In this case, the medicine will not work. Uninstall Acrobat and reinstall! As another possible reason for the lack of treatment, one should not exclude crack blocking by an antivirus. In this case, you need to run the medicine manually with the antivirus disabled. Paths for finding cracks in the Master Collection distribution: ..\Adobe 2024\products\APRO_x32\crack.exe for the 32-bit version, ..\Adobe 2024\products\APRO\crack.exe for the 64-bit version. Run the medicine and just wait for the message "Cracking complete. Enjoy!" to appear. After this, you can freely use the cured application.

Question: Can I install Acrobat Pro 32-bit and 64-bit at the same time?
Answer: Yes, this is possible, although I don’t understand why this is necessary...

Question: I cannot connect to the Adobe server with my ID from Acrobat Pro. What should I do?
Answer: Unfortunately, this is such a feature of the medicine. Here the program is slightly broken.

Question: Why am I blocked from creating a new project in Premiere Rush?
Answer: For the program to work fully, you need to connect to the Adobe server with your ID by selecting “Help->Sign In” from the program menu and going through authorization.

Question: Why does Fresco close immediately after launch?
Answer: Fresco does not allow you to use it without authorization. Unfortunately, it is not possible to log in to a program that cannot be launched normally. But you can log in to any other Adobe program by selecting Help->Sign In from the program menu. By logging into one program, you are logging in to all installed Adobe programs at once. After this, Fresco will start correctly.

Question: Even if I select English during installation, Fresco is still in Russian. What to do?
Answer: This type of installer does not provide the user with the ability to select a language for Fresco. The language is selected automatically based on the preferred OS language settings. If you want to change your preferred language, then go to Settings->Time & Language->Language->Preferred languages ​​and there in the list set English above Russian. After this, the Fresco interface language will change. But keep in mind that these are system settings, not specific program settings. The interface language of some other programs and even some interface elements of the OS itself may change!

Question: Even if I select English during installation, XD is still in Russian? What to do?
Answer: This type of installer does not provide the user with the ability to select a language for XD. The language is selected automatically based on the language of the operating system. However, the program interface language can be changed on an already installed application. To do this, launch the program and open any template. After this, go through authorization in the program menu “Help->Sign In...”. Restart the program, open the template again, then in the program menu click “Edit->Preferences->Language” and set the desired application interface language.

Question: When I launch Premiere Pro, After Effects, Media Encoder and a number of other programs, the application closes with error 0xc0000142! What's wrong?
Answer: Beginning with version 24.1, these applications require your processor to support Advanced Vector Extensions 2 (AVX2). If your processor does not support this technology, then none of these programs will start, producing the same error. I recommend “rolling back” to a version of the program younger than 24.1.

Question: Where did the Timeline settings, as well as social network presets - Youtube, Twitter, etc. disappear from Premiere Pro? There are no corresponding presets in Media Encoder either!
Answer: They didn’t disappear anywhere. They simply become accessible only after authorization. To log in, in the program menu, click “Help->Sign In...”.

Question: Can you tell me more about the ability to fully use Maxon Cinema 4D?
Answer: Maxon Cinema 4D is forced to be installed as part of Adobe After Effects 2024. The trial version is installed by default. But I treated it for you. Alas, the developers removed the Russian interface from the 2024 line version. So don’t ask me for his absence. As for the downgrade, it was made to a version that is still quite easy to treat.

Question: When using some programs, I began to receive a pop-up notification that the trial period was about to end. What to do?
Answer: To solve this problem, the medicine has a built-in mechanism that blocks access to a number of IP addresses. Unfortunately, the list of these addresses changes periodically. But we can also dynamically correct it! If you use the standard Windows Firewall (Defender) as a firewall, then simply copy the file ..\Adobe 2024\packages\setup.exe to the Desktop from the distribution and run it. After a few seconds, the list of blocked IP addresses will be updated, and the pop-up notification will stop bothering you. But if you are using a third-party firewall, and it ignores the connection rules specified in Windows Firewall, then solve your problem yourself. In particular, you can use your firewall to block network access to the main executable file of the program, the launch of which initiates the appearance of the ill-fated notification (for example, Photoshop.exe).

Question: Can I somehow update applications included in the Master Collection?
Answer: I strongly do not recommend updating using the standard tools of the programs themselves or using the Creative Cloud Desktop application, as this will 100% lead to failure of the treatment. I advise you to use my own assemblies with updated versions of programs. The new version can be placed on top of the old one if both versions belong to the same line (for example, both versions have the “2024” label). Moreover, if you have the Master Collection, and you only need to update Photoshop, then you can use a separate assembly of Photoshop - everything will be updated correctly, with all your settings transferred to the new version.